Current File : //opt/cloudlinux/alt-php74/root/etc/php.d.all/newrelic.ini
; This file contains the various settings for the New Relic PHP agent. There
; are many options, all of which are described in detail at the following URL:
; https://docs.newrelic.com/docs/agents/php-agent/configuration/php-agent-configuration
;
; If you use a full path to the extension you insulate yourself from the
; extension directory changing if you change PHP installations or versions.
; If you do not use an absolute path then the file must be installed in the
; active configuration's extension directory.
extension = "newrelic.so"
[newrelic]
; Setting: newrelic.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enable or disable the agent. Please note that you cannot globally
; disable the agent and then selectively enable it on a per-directory
; basis. If you disable the agent in the global INI file then the
; agent will not initialize at all. However, you can selectively
; disable the agent on a per-directory basis.
;
;newrelic.enabled = true
; Setting: newrelic.license
; Type : string
; Scope : per-directory
; Default: none
; Info : Sets the New Relic license key to use. This can vary from directory
; to directory if you are running a multi-tenant system. By special
; dispensation if you upgraded from a previous version of the agent
; where the license key was set in the daemon, the installation and
; upgrade script will have preserved your license key from the file
; /etc/newrelic/newrelic.cfg, but ONLY if you installed via rpm/yum
; or dpkg. The key is saved in /etc/newrelic/upgrade_please.key
; and the agent will look for that file if you do not specify a valid
; license here.
; It is *STRONGLY* recommended that you set the license key in your
; INI file(s) and do not rely on the key file being present. Also
; please note that even if you are not letting the agent start the
; daemon and are still using newrelic.cfg (see below) the license
; keyword in that file is no longer obeyed. Instead the agent will
; use the preserved value of that license from the key file.
; Once you have updated your INI files to contain the license we
; urge you to remove /etc/newrelic/upgrade_please.key in order to
; eliminate the potential for confusion about exactly where the key
; is coming from.
;
newrelic.license = "REPLACE_WITH_REAL_KEY"
; Setting: newrelic.logfile
; Type : string
; Scope : system
; Default: none
; Info : Sets the name of the file to send log messages to.
;
newrelic.logfile = "/var/log/alt-php74-newrelic/php_agent.log"
; Setting: newrelic.loglevel
; Type : string
; Scope : system
; Default: "info"
; Info : Sets the level of detail to include in the log file. You should
; rarely need to change this from the default, and usually only under
; the guidance of technical support.
; Must be one of the following values:
; always, error, warning, info, verbose, debug, verbosedebug
;
;newrelic.loglevel = "info"
; Setting: newrelic.high_security
; Type : boolean
; Scope : system
; Default: false
; Info : Enables high security for all applications. When high security is
; enabled, the following behavior will take effect:
; * Raw SQL strings will never be gathered, regardless of the value of
; newrelic.transaction_tracer.record_sql.
; * Request parameters will never be captured, regardless of the
; newrelic.attributes configuration settings.
; * The following API functions will have no effect, and will return
; false:
; newrelic_add_custom_parameter
; newrelic_set_user_attributes
; newrelic_record_custom_event
;
; IMPORTANT: If you change this setting, you must also change the RPM
; UI security setting. If the two settings do not match, then no data
; will be collected.
;
; IMPORTANT: This setting is not compatible with
; newrelic.security_policies_token. Only one may be set. If both are
; set an error will be thrown and the agent will not connect.
;
;newrelic.high_security = false
; Setting: newrelic.appname
; Type : string
; Scope : per-directory
; Default: "PHP Application"
; Info : Sets the name of the application that metrics will be reported into.
; This can in fact be a list of up to 3 application names, each of
; which must be separated by a semi-colon. The first name in any such
; list is considered the 'primary' application name and must be unique
; for each account / license key.
;
newrelic.appname = "PHP Application"
; Setting: newrelic.process_host.display_name
; Type : string
; Scope : system
; Default: none
; Info : Sets a custom display name for your application server in the New
; Relic UI. Servers are normally identified by host and port number.
; This setting allows you to give your hosts more recognizable names.
;
;newrelic.process_host.display_name = ""
;
; Beginning with version 3.0 of the agent, the daemon can be automatically
; started by the agent. There is no need to start the daemon before starting
; Apache or PHP-FPM. All of the newrelic.daemon.* settings are options that
; control the behavior of the daemon. These settings are converted into the
; appropriate command line options when the agent starts the daemon. This is
; now the preferred method of starting the daemon. There are still usage cases
; (such as using a single daemon for serving multiple Apache instances) where
; you may want to start the daemon via it's init script, but for most users,
; this is the best place to configure and start the daemon.
;
; The agent will only launch the daemon if one isn't already running. Also
; note that the agent will NOT stop the daemon once it has started. If you
; want control over exactly when the daemon starts and stops you can still
; achieve that by creating a daemon configuration file (located by default at
; /etc/newrelic/newrelic.cfg) and running the chkconfig or equivalent command.
; Please see the newrelic.cfg template file for details. That template file
; is located at /usr/lib/newrelic-php5/scripts/newrelic.cfg.template.
;
; Also please note that the options here and in newrelic.cfg are identical,
; except that in this file they are preceded with "newrelic.daemon.".
;
; Setting: newrelic.daemon.logfile
; Type : string
; Scope : system
; Default: none
; Info : Sets the name of the file to send daemon log messages to.
;
newrelic.daemon.logfile = "/var/log/alt-php74-newrelic/newrelic-daemon.log"
; Setting: newrelic.daemon.loglevel
; Type : string
; Scope : system
; Default: "info"
; Info : Sets the level of detail to include in the daemon log. You should
; rarely need to change this from the default, and usually only under
; the guidance of technical support.
; Must be one of the following values:
; always, error, warning, info, debug
;
; The values verbose and verbosedebug are deprecated aliases for debug.
;
;newrelic.daemon.loglevel = "info"
; Setting: newrelic.daemon.address (alias: newrelic.daemon.port)
; Type : string or integer
; Scope : system
; Default: /tmp/.newrelic.sock
; Info : Sets how the agent and daemon communicate. How this is set can impact
; performance.
;
; The default is to use a UNIX-domain socket located at
; /tmp/.newrelic.sock. If you want to use UNIX domain sockets then
; this value must begin with a "/".
;
; On Linux, an abstract socket can be created by prefixing the socket
; name with '@'. Support for abstract sockets was added in PHP agent
; version 5.2.
;
; If you set this to an integer value in the range 1-65535, then this
; will instruct the agent to use a normal TCP socket on the port
; specified. This may be easier to use if you are using a chroot
; environment.
;
; To connect to a daemon that is running on a different host, set this
; value to '<host>:<port>', where '<host>' denotes either a host name
; or an IP address and '<port>' denotes a valid port number. IPv6 is
; supported.
;
; In order to use a TCP socket with a port in the range 1-1023,
; the daemon must be started by the super-user. This is a fundamental
; OS limitation and not one imposed by the daemon itself.
;
;newrelic.daemon.address = "/tmp/.newrelic.sock"
; Setting: newrelic.daemon.ssl_ca_bundle
; Type : string
; Scope : system
; Default: none
; Info : Sets the location of a file containing CA certificates in PEM
; format. When set, the certificates in this file will be used to
; authenticate the New Relic collector servers. If
; newrelic.daemon.ssl_ca_path is also set (see below), the
; certificates in this file will be searched first, followed by the
; certificates contained in the newrelic.daemon.ssl_ca_path
; directory.
;
;newrelic.daemon.ssl_ca_bundle = ""
; Setting: newrelic.daemon.ssl_ca_path
; Type : string
; Scope : system
; Default: none
; Info : Sets the location of a directory containing trusted CA certificates
; in PEM format. When set, the certificates in this directory will be
; used to authenticate the New Relic collector servers. If
; newrelic.daemon.ssl_ca_bundle is also set (see above), it will be
; searched first followed by the certificates contained in
; newrelic.daemon.ssl_ca_path.
;
;newrelic.daemon.ssl_ca_path = ""
; Setting: newrelic.daemon.proxy
; Type : string
; Scope : system
; Default: none
; Info : Sets the host and user credentials to use as an egress proxy. This
; is only used if your site requires a proxy in order to access
; external servers on the internet, in this case the New Relic data
; collection servers. This is expressed in one of the following forms:
; hostname
; hostname:port
; user@hostname
; user@hostname:port
; user:password@hostname
; user:password@hostname:port
;
;newrelic.daemon.proxy = ""
; Setting: newrelic.daemon.pidfile
; Type : string
; Scope : system
; Default: OS dependent
; Info : Sets the name of the file to store the running daemon's process ID
; (PID) in. This file is used by the daemon startup and shutdown
; script to determine whether or not the daemon is already running.
;
;newrelic.daemon.pidfile = ""
; Setting: newrelic.daemon.location
; Type : string
; Scope : system
; Default: /usr/bin/newrelic-daemon
; Info : Sets the name of the daemon executable to launch.
; Please note that on OpenSolaris where /usr is frequently a read-only
; file system, the default daemon location is
; /opt/newrelic/bin/newrelic-daemon.
;
newrelic.daemon.location = "/opt/alt/php74/usr/bin/newrelic-daemon"
; Setting: newrelic.daemon.collector_host
; Type : string
; Scope : system
; Default: none
; Info : Sets the host name of the New Relic data collector host to use.
; Please note that this is NOT any form of local host. It refers to
; the New Relic provided host. There is very little reason to ever
; change this from the default except in certain very special
; circumstances, and then only on instruction from a New Relic sales
; person or support staff member.
;
;newrelic.daemon.collector_host = ""
; Setting: newrelic.daemon.dont_launch
; Type : integer (0, 1, 2 or 3)
; Scope : system
; Default: 0
; Info : If you prefer to have the daemon launched externally before the
; agent starts up, set this variable to non-zero. The value you
; choose determines exactly when the agent is allowed to start the
; daemon:
; 0 - agent can start the daemon any time it needs to
; 1 - non-CLI (i.e Apache / php-fpm) agents can start the daemon
; 2 - only CLI agents can start the daemon
; 3 - the agent will never start the daemon
;
;newrelic.daemon.dont_launch = 0
; Setting: newrelic.daemon.utilization.detect_aws
; Type : boolean
; Scope : system
; Default: true
; Info : Enable detection of whether the system is running on AWS. This will
; create a small amount of network traffic on daemon startup.
;
;newrelic.daemon.utilization.detect_aws = true
; Setting: newrelic.daemon.utilization.detect_azure
; Type : boolean
; Scope : system
; Default: true
; Info : Enable detection of whether the system is running on Azure. This will
; create a small amount of network traffic on daemon startup.
;
;newrelic.daemon.utilization.detect_azure = true
; Setting: newrelic.daemon.utilization.detect_gcp
; Type : boolean
; Scope : system
; Default: true
; Info : Enable detection of whether the system is running on Google Cloud
; Platform. This will create a small amount of network traffic on
; daemon startup.
;
;newrelic.daemon.utilization.detect_gcp = true
; Setting: newrelic.daemon.utilization.detect_pcf
; Type : boolean
; Scope : system
; Default: true
; Info : Enable detection of whether the system is running on Pivotal Cloud
; Foundry.
;
;newrelic.daemon.utilization.detect_pcf = true
; Setting: newrelic.daemon.utilization.detect_docker
; Type : boolean
; Scope : system
; Default: true
; Info : Enable detection of a system running on Docker. This will be used
; to support future features.
;
;newrelic.daemon.utilization.detect_docker = true
; Setting: newrelic.daemon.app_timeout
; Type : time specification string ("5m", "1h20m", etc)
; Scope : system
; Default: 10m
; Info : Sets the elapsed time after which an application will be considered
; inactive. Inactive applications do not count against the maximum
; limit of 250 applications. Allowed units are "ns", "us", "ms", "s",
; "m", and "h".
;
; A value of 0 is interpreted as "no timeout". New applications with
; this setting count toward the 250 application limit. In addition, with
; a 0-value setting, the agent's daemon process cannot release a small
; amount of memory per application back to the operating system.
;
; We do not recommend using a 0-value setting except under the guidance
; of technical support; instead, for occasional background transactions,
; we suggest using a value of twice the interval (so, for an hourly
; background job, set the timeout to 2 hours).
;newrelic.daemon.app_timeout = 10m
; Setting: newrelic.daemon.app_connect_timeout
; Type : time specification string ("1s", "5m", etc)
; Scope : system
; Default: 0
; Info : Sets the maximum time the agent should wait for the daemon
; connecting an application. A value of 0 causes the agent to only
; make one attempt at connecting to the daemon. Allowed units are
; "ns", "us", "ms", "s", "m", and "h".
;
; With this timeout set, the agent will not immediately drop a
; transaction when the daemon hasn't connected to the backend yet, but
; rather grant the daemon time to establish the connection.
;
; If setting a timeout, the recommended value is 10s. It is
; recommended to only set this timeout when instrumenting long-lived
; background tasks, as in case of connection problems the agent will
; block for the given timeout at every transaction start.
;
;newrelic.daemon.app_connect_timeout = 0
; Setting: newrelic.daemon.start_timeout
; Type : time specification string ("1s", "5m", etc)
; Scope : system
; Default: 0
; Info : Sets the maximum time the agent should wait for the daemon
; to start after a daemon launch was triggered. A value of 0 causes
; the agent to not wait. Allowed units are "ns", "us", "ms", "s", "m"
; and "h".
;
; The specified timeout value will be passed to the daemon via the
; --wait-for-port flag. This causes daemon startup to block until a
; socket is acquired or until the timeout has elapsed.
;
; If setting a timeout, the recommended value is 2s to 5s. It is
; recommended to only set this timeout when instrumenting long-lived
; background tasks, as in case of daemon start problems the agent will
; block for the given timeout at every transaction start.
;
;newrelic.daemon.start_timeout = 0
; Setting: newrelic.error_collector.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enable the New Relic error collector. This will record the 20 most
; severe errors per harvest cycle. It is rare to want to disable this.
; Please also note that your New Relic subscription level may force
; this to be disabled regardless of any value you set for it.
;
;newrelic.error_collector.enabled = true
; Setting: newrelic.error_collector.ignore_user_exception_handler
; Type : boolean
; Scope : per-directory
; Default: false
; Info : If enabled, the New Relic error collector will ignore any exceptions
; that are handled by an exception handler installed with
; set_exception_handler().
;
; If an exception handler has not been installed, this setting will
; have no effect, as PHP will turn the uncaught exception into a fatal
; error and it will be handled accordingly by the New Relic error
; collector.
;
;newrelic.error_collector.ignore_user_exception_handler = false
; Setting: newrelic.error_collector.ignore_exceptions
; Type: string
; Scope: per-directory
; Default: none
; Info: A comma separated list of exception classes that the agent should
; ignore. When an unhandled exception occurs, the agent will perform
; the equivalent of `$exception instanceof Class` for each of the
; classes listed. If any of those checks returns true, the agent
; will not record an error.
;
; Please note that this setting only applies to uncaught exceptions.
; Exceptions recorded using the newrelic_notice_error API are not
; subject to filtering.
;
;newrelic.error_collector.ignore_exceptions = ""
; Setting: newrelic.error_collector.ignore_errors
; Type: int or a bitwise expression of PHP-defined error constants
; Scope: per-directory
; Default: none
; Info: Sets the error levels that the agent should ignore.
;
; The value for this setting uses similar syntax to the error syntax
; for the PHP error reporting. For example, to configure the PHP Agent
; to ignore E_WARNING and E_ERROR level errors, use:
;
; newrelic.error_collector.ignore_errors = E_WARNING | E_ERROR
;
; or
;
; newrelic.error_collector.ignore_errors = 3
;
; The list of constants are available at:
; http://php.net/manual/en/errorfunc.constants.php
;
; Please note that this setting does not apply to errors recorded
; using the newrelic_notice_error API.
;
;newrelic.error_collector.ignore_errors = 0
; Setting: newrelic.error_collector.record_database_errors
; Type : boolean
; Scope : per-directory
; Default: false
; Info : Currently only supported for MySQL database functions. If enabled,
; this will cause errors returned by various MySQL functions to be
; treated as if they were PHP errors, and thus subject to error
; collection. This is only obeyed if the error collector is enabled
; above and the account subscription level permits error trapping.
;
;newrelic.error_collector.record_database_errors = false
; Setting: newrelic.error_collector.prioritize_api_errors
; Type : boolean
; Scope : per-directory
; Default: false
; Info : If the error collector is enabled and you use the New Relic API to
; notice an error, if this is set to true then assign the highest
; priority to such errors.
;
;newrelic.error_collector.prioritize_api_errors = false
; Setting: newrelic.browser_monitoring.auto_instrument
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables automatic real user monitoring ("auto-RUM").
; When enabled will cause the agent to insert a header and a footer
; in HTML output that will time the actual end-user experience.
;
;newrelic.browser_monitoring.auto_instrument = true
; Setting: newrelic.transaction_tracer.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables the transaction tracer. When enabled this will
; produce a detailed call graph for any transaction that exceeds a
; certain threshold (see next entry). Only one transaction trace per
; application per harvest cycle is stored and it is always the slowest
; transaction during that cycle. Transaction traces are extremely
; useful when diagnosing problem spots in your application. Please
; note that TT's may be disabled by your account subscription level
; regardless of what you set here.
;
;newrelic.transaction_tracer.enabled = true
; Setting: newrelic.transaction_tracer.threshold
; Type : string with a time specification or the word "apdex_f"
; Scope : per-directory
; Default: "apdex_f"
; Info : Specifies the threshold above which a transaction becomes a
; candidate for the transaction tracer. This can either be an absolute
; time value like "200ms" or "1s250ms" or "1h30m" or "750us" or the
; word "apdex_f". This last value, "apdex_f", means "4 times apdex_t".
; Thus the threshold changes according to your apdex_t setting. This
; is the default.
;
;newrelic.transaction_tracer.threshold = "apdex_f"
; Setting: newrelic.transaction_tracer.detail
; Type : integer in the range 0-1
; Scope : per-directory
; Default: 1
; Info : Sets the level of detail in a transaction trace. Setting this to 0
; will only show the relatively few PHP functions that New Relic has
; deemed to be "interesting", as well as any custom functions you set
; (see below). A setting of 1 will trace and time all user functions.
;
; In earlier releases of the agent this was known as "top100".
;
;newrelic.transaction_tracer.detail = 1
; Setting: newrelic.transaction_tracer.slow_sql
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables the "slow SQL" tracer. When enabled, this will
; record the top 10 slowest SQL calls along with a stack trace of
; where the call occurred in your code.
;
;newrelic.transaction_tracer.slow_sql = true
; Setting: newrelic.transaction_tracer.stack_trace_threshold
; Type : time specification string ("500ms", "1s750ms" etc)
; Scope : per-directory
; Default: 500ms
; Info : Sets the threshold above which the New Relic agent will record a
; stack trace for a transaction trace.
;
;newrelic.transaction_tracer.stack_trace_threshold = 500
; Setting: newrelic.transaction_tracer.explain_enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables requesting "explain plans" from MySQL databases
; accessed via MySQLi or PDO_MySQL for slow SQL calls. The threshold
; for requesting explain plans is defined below.
;
;newrelic.transaction_tracer.explain_enabled = true
; Setting: newrelic.transaction_tracer.explain_threshold
; Type : time specification string ("750ms", "1s 500ms" etc)
; Scope : per-directory
; Default: 500ms
; Info : Used by the slow SQL tracer to set the threshold above which an SQL
; statement is considered "slow", and to set the threshold above which
; the transaction tracer will request an "explain plan" from the data-
; base for slow SQL. This latter feature may not be active yet, please
; refer to the agent release notes to see when it becomes available.
; Only relevant if explain_enabled above is set to true.
;
;newrelic.transaction_tracer.explain_threshold = 500
; Setting: newrelic.transaction_tracer.record_sql
; Type : "off", "raw" or "obfuscated"
; Scope : per-directory
; Default: "obfuscated"
; Info : Sets how SQL statements are recorded (if at all). If this is set to
; "raw" then no attempt is made at obfuscating SQL statements.
; USING "raw" IS HIGHLY DISCOURAGED IN PRODUCTION ENVIRONMENTS!
; Setting this to "raw" has considerable security implications as it
; can expose sensitive and private customer data.
;
;newrelic.transaction_tracer.record_sql = "obfuscated"
; Setting: newrelic.transaction_tracer.custom
; Type : string
; Scope : per-directory
; Default: none
; Info : Sets the name(s) of additional functions you want to instrument and
; appear in transaction traces. This is only meaningful if you have
; set newrelic.transaction_tracer.detail to 0. This can be a comma-
; separated list of function or class method names.
;
;newrelic.transaction_tracer.custom = ""
; Setting: newrelic.transaction_tracer.internal_functions_enabled
; Type : boolean
; Scope : system
; Default: false
; Info : Enables or disables support for tracing internal functions (that is,
; functions written in C and provided either via the PHP standard
; library or PECL extensions). When enabled, internal functions will
; appear in transaction traces like functions written in PHP.
;
; Note that enabling this option may result in transactions being up to
; 5% slower. Enabling this option is only recommended when specifically
; debugging performance issues where an internal function is suspected
; to be slow.
;
;newrelic.transaction_tracer.internal_functions_enabled = false
; Setting: newrelic.framework
; Type : string
; Scope : per-directory
; Default: empty (auto-detect framework)
; Info : Disables automatic framework detection, telling the agent to
; attempt to name transactions according to the specified framework.
; Specifying "no_framework" will disable framework-related transaction
; naming entirely. Please let us know at support.newrelic.com if you
; encounter a failure with framework autodetection.
;
; Must be one of the following values:
; cakephp, codeigniter, drupal, drupal8, joomla, kohana, laravel,
; magento, magento2, mediawiki, silex, slim, symfony1, symfony2,
; wordpress, yii, zend, zend2, no_framework
;
; Note that "drupal" covers only Drupal 6 and 7.
;
;newrelic.framework = ""
; Setting: newrelic.webtransaction.name.remove_trailing_path
; Type : boolean
; Scope : per-directory
; Default: false
; Info : Used to aid naming transactions correctly when an unsupported
; framework is being used. This option will cause anything after the
; script name to be stripped from a URL. For example, setting this
; would cause the "/xyz/zy" to be stripped from a URL such as
; "/path/to/foo.php/xyz/zy".
;
;newrelic.webtransaction.name.remove_trailing_path = false
; Setting: newrelic.webtransaction.name.functions
; Type : string
; Scope : per-directory
; Default: none
; Info : Unless a specific framework such as Drupal or Wordpress has been
; detected, transactions are named according to the first script
; encountered, such as login.php. However, if you use a dispatcher
; file such as index.php this produces less useful data. If you use
; a dispatcher to redirect to actions such as "login", "show", "edit"
; etc, you can set this to the top level functions for those actions,
; and the function names specified here will be used to name the
; transaction.
;
;newrelic.webtransaction.name.functions = ""
; Setting: newrelic.webtransaction.name.files
; Type : string
; Scope : per-directory
; Default: none
; Info : Same as newrelic.webtransaction.name.functions above but using file
; names instead of function names. Accepts standard POSIX regular
; expressions.
;
;newrelic.webtransaction.name.files = ""
; Setting: newrelic.daemon.auditlog
; Type : string
; Scope : system
; Default: none
; Info : Sets the name of a file to record all uncompressed, un-encoded
; content that is sent from your machine to the New Relic servers.
; This includes the full URL for each command along with the payload
; delivered with the command. This allows you to satisfy yourself
; that the agent is not sending any sensitive data to our servers.
; This file must be a different file the the newrelic.daemon.logfile
; setting above. If you set it to the same name,
; then audit logging will be silently ignored.
;
;newrelic.daemon.auditlog = "/var/log/alt-php74-newrelic/audit.log"
; Setting: newrelic.transaction_events.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Collect and report transaction analytics event data. Event data
; allows the New Relic UI to show additional information such as
; histograms. This setting was formerly called
; newrelic.analytics_events.enabled.
;
;newrelic.transaction_events.enabled = true
; Setting: newrelic.attributes.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enable or disable the collection of attributes generated by the
; agent or generated by the user though newrelic_add_custom_parameter.
; This setting will take precedence over all other attribute
; configuration settings. For more information, please refer to:
; https://docs.newrelic.com/docs/agents/manage-apm-agents/agent-metrics/agent-attributes
;
;newrelic.attributes.enabled = true
; Setting: newrelic.transaction_events.attributes.enabled
; newrelic.transaction_tracer.attributes.enabled
; newrelic.error_collector.attributes.enabled
; newrelic.browser_monitoring.attributes.enabled
; Type : boolean
; Scope : per-directory
; Default: true, except for browser_monitoring.attributes.enabled
; Info : Control which destinations receive attributes.
; These configuration settings will override the .include and .exclude
; settings below. For more information, please refer to:
; https://docs.newrelic.com/docs/agents/manage-apm-agents/agent-metrics/agent-attributes
;
; These settings were formerly called:
; newrelic.transaction_tracer.capture_attributes
; newrelic.error_collector.capture_attributes
; newrelic.analytics_events.capture_attributes
; newrelic.browser_monitoring.capture_attributes
;
;newrelic.transaction_events.attributes.enabled = true
;newrelic.transaction_tracer.attributes.enabled = true
;newrelic.error_collector.attributes.enabled = true
;newrelic.browser_monitoring.attributes.enabled = false
; Setting: newrelic.attributes.include
; newrelic.attributes.exclude
;
; newrelic.transaction_events.attributes.include
; newrelic.transaction_events.attributes.exclude
;
; newrelic.transaction_tracer.attributes.include
; newrelic.transaction_tracer.attributes.exclude
;
; newrelic.error_collector.attributes.include
; newrelic.error_collector.attributes.exclude
;
; newrelic.browser_monitoring.attributes.include
; newrelic.browser_monitoring.attributes.exclude
;
; Type : string
; Scope : per-directory
; Default: none
; Info : Each attribute has a default set of destinations. For example, the
; 'request_uri' attribute's default destinations are errors and
; transaction traces. The 'httpResponseCode' attribute's default
; destinations are errors, transaction traces, and transaction events.
;
; These configuration options allow complete control over the
; destinations of attributes.
;
; To include the attribute whose key is 'alpha' in errors, the
; configuration is:
; newrelic.error_collector.include = alpha
;
; To exclude the attribute whose key is 'alpha' from errors, the
; configuration is:
; newrelic.error_collector.exclude = alpha
;
; The newrelic.attributes.exclude and newrelic.attributes.include
; settings affect all destinations.
;
; To exclude the attributes 'beta' and 'gamma' from all destinations,
; the configuration is:
; newrelic.attributes.exclude = beta,gamma
;
; If one of the values in the comma separated list ends in a '*',
; it will match any suffix. For example, to exclude any attributes
; which begin with 'psi', the configuration is:
; newrelic.attributes.exclude = psi*
;
; For more information, please refer to:
; https://docs.newrelic.com/docs/agents/manage-apm-agents/agent-metrics/agent-attributes
;
;newrelic.attributes.include = ""
;newrelic.attributes.exclude = ""
;
;newrelic.transaction_events.attributes.include = ""
;newrelic.transaction_events.attributes.exclude = ""
;
;newrelic.transaction_tracer.attributes.include = ""
;newrelic.transaction_tracer.attributes.exclude = ""
;
;newrelic.error_collector.attributes.include = ""
;newrelic.error_collector.attributes.exclude = ""
;
;newrelic.browser_monitoring.attributes.include = ""
;newrelic.browser_monitoring.attributes.exclude = ""
; Setting: newrelic.feature_flag
; Type : string
; Scope : system
; Default: none
; Info : Enables new and experimental features within the PHP agent. These
; flags are used to selectively enable features that are intended to be
; enabled by default in later versions of the PHP agent.
;
;newrelic.feature_flag = ""
; Setting: newrelic.custom_insights_events.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables the API function newrelic_record_custom_event.
;
;newrelic.custom_insights_events.enabled = true
; Setting: newrelic.labels
; Type : string (Use quotes)
; Scope : per-directory
; Default: none
; Info : Sets the label names and values to associate with the application.
; The list is a semi-colon delimited list of colon-separated name and
; value pairs.
;
; There are a maximum of 64 label name/value pairs allowed.
;
; The maximum length of the name and value is 255 characters each.
;
; Leading or trailing whitespace in the name or value will be trimmed.
;
; UTF-8 characters are allowed.
;
; E.g., "Server:One;Data Center:Primary"
;
;newrelic.labels = ""
; Setting: newrelic.synthetics.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables support for Synthetics transactions.
; For more information, please see:
; https://docs.newrelic.com/docs/synthetics/new-relic-synthetics/getting-started/new-relic-synthetics
;
;newrelic.synthetics.enabled = true
; Setting: newrelic.cross_application_tracer.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables support for Cross Application Tracing, aka "CAT".
;
;newrelic.cross_application_tracer.enabled = true
; Setting: newrelic.distributed_tracing_enabled
; Type : boolean
; Scope : per-directory
; Default: false
; Info : Distributed tracing lets you see the path that a request takes
; through your distributed system. Enabling distributed tracing changes
; the behavior of some New Relic features, so carefully consult the
; transition guide before you enable this feature:
; https://docs.newrelic.com/docs/transition-guide-distributed-tracing
;
;newrelic.distributed_tracing_enabled = false
; Setting: newrelic.distributed_tracing_exclude_newrelic_header
; Type : boolean
; Scope : per-directory
; Default: false
; Info : Set this to true to exclude the New Relic distributed tracing header
; that is attached to outbound requests, and to instead only rely on
; W3C Trace Context Headers for distributed tracing. If this is false
; then both types of headers are attached to outbound requests.
;
; The New Relic distributed tracing header allows interoperability
; with older agents that do not support W3C Trace Context headers.
; Agent versions that support W3C Trace Context headers will
; prioritize them over New Relic headers for distributed tracing.
;
;newrelic.distributed_tracing_exclude_newrelic_header = false
; Setting: newrelic.span_events_enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables the creation of span events. This requires
; Distributed Tracing to be enabled.
;
;newrelic.span_events_enabled = true
; Setting: newrelic.transaction_tracer.gather_input_queries
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables support for tracing Doctrine DQL with Slow SQL queries.
; This requires Slow SQLs to be enabled.
;
;newrelic.transaction_tracer.gather_input_queries = true
; Setting: newrelic.error_collector.capture_events
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables capturing error events, which are displayed as
; Error Analytics in the UI.
;
;newrelic.error_collector.capture_events = true
; Setting: newrelic.guzzle.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables support for the Guzzle library.
;
;newrelic.guzzle.enabled = true
; Setting: newrelic.phpunit_events.enabled
; Type : boolean
; Scope : per-directory
; Default: false
; Info : Collect and report PHPUnit (https://phpunit.de/) data as custom
; Insights events. Test suite summary data are sent as "TestSuite"
; events, while individual test cases are sent as "Test" events.
; Depending on your events retention policy, enabling this setting may
; impact your billing statement.
;
; Please note that exception messages are collected and sent with
; events. Additionally, if you use PHPUnit's --disallow-test-output
; flag, any offending output from a risky test will also be included.
;
;newrelic.phpunit_events.enabled = false
; Setting: newrelic.datastore_tracer.instance_reporting.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables capturing datastore instance information,
; specifically host and port_path_or_id. This information is sent as a
; metric and as attributes on transaction traces and slow SQL traces.
;
;newrelic.datastore_tracer.instance_reporting.enabled = true
; Setting: newrelic.datastore_tracer.database_name_reporting.enabled
; Type : boolean
; Scope : per-directory
; Default: true
; Info : Enables or disables capturing information about database names. This
; information is sent as an attribute on transaction traces and slow
; SQL traces.
;
;newrelic.datastore_tracer.database_name_reporting.enabled = true
; Setting: newrelic.security_policies_token
; Type : string
; Scope : per-directory
; Default: none
; Info : Enables or disables security policies. If security policies are
; enabled on your account, you should paste the security policies token
; from the New Relic APM UI here.
;
; IMPORTANT: This setting is not compatible with newrelic.high_security.
; Only one may be set. If both are set an error will be thrown and the
; agent will not connect.
;
;newrelic.security_policies_token = ""
; Setting: newrelic.preload_framework_library_detection
; Type : boolean
; Scope : system
; Default: true
; Info : Enables detection of frameworks and libraries from opcache.
;
; This only happens when preloading is enabled (when `opcache.preload`
; is set).
;
;newrelic.preload_framework_library_detection = true
; setting: newrelic.transaction_tracer.max_segments_web
; type : integer in the range 0 - 2^31-1
; scope : per-directory
; default: 0
; info : Specifies the maximum number of segments the PHP agent shall
; record, once that maximum is reached sampling will occur.
;
; The PHP agent reports transaction traces and distributed traces as a
; collection of segments.
; Each segment represents a method or a function call in a transaction
; trace. The default value for this configuration is 0, indicating that
; the PHP agent shall capture all segments during a transaction. At the
; end of a transaction, it assembles the highest priority segments to
; report in a transaction trace.
;
; For long-running PHP processes with hundreds of thousands or millions
; of function calls, setting this to a value greater than 1 prevents the
; PHP agent from exhausting system memory when recording segments.
;
; Segment size can vary based upon the length of the corresponding
; method's name, the length of its class name, and the number of
; subsequent calls made by the method. That said, a conservative estimate
; is 400 bytes per segment. To limit the PHP agent to 40 mb for segment
; capture, set this value to 100000. If this value is set lower than
; 2000, it further limits the total number of segments reported for
; transaction traces.
;
; This configuration setting is only for PHP web processes; it will not
; effect PHP CLI processes. To set a limit for CLI processes use
; newrelic.transaction_tracer.max_segments_cli.
;newrelic.transaction_tracer.max_segments_web = 0
; setting: newrelic.transaction_tracer.max_segments_cli
; type : integer in the range 0 - 2^31-1
; scope : per-directory
; default: 100000
; info : Specifies the maximum number of segments the PHP agent shall
; record, once that maximum is reached sampling will occur.
;
; The PHP agent reports a transaction trace as a collection of segments.
; each segment represents a method or a function call in a transaction
; trace. The default value for this configuration is 100000. When a value
; of less than 1 is set, it will indicate that the PHP agent shall capture
; all segments during a transaction. At the end of a transaction, the agent
; assembles the highest priority segments to report in a transaction trace.
;
; For long-running PHP processes with hundreds of thousands or millions
; of function calls, setting this to a value greater than 1 prevents the
; PHP agent from exhausting system memory when recording segments.
;
; Segment size can vary based upon the length of the corresponding
; method's name, the length of its class name, and the number of
; subsequent calls made by the method. That said, a conservative estimate
; is 400 bytes per segment. To limit the PHP agent to 40 mb for segment
; capture, set this value to 100000. If this value is set lower than 2000,
; it further limits the total number of segments reported for transaction
; traces.
;
; This configuration setting is only for PHP CLI processes; it will not
; effect PHP web processes. To set a limit for web processes use
; newrelic.transaction_tracer.max_segments_web.
;newrelic.transaction_tracer.max_segments_cli = 100000
Mini Shell